REOTEMP Dual Mode Thermometers | Peerless, Inc.

A Dual Mode Thermometer consists of two temperature sensors in one: A Bimetal Dial Thermometer (for local indication) and a Thermocouple or RTD sensor (to send a signal). This redundant reading of a Dual Mode Thermometer increases safety and reliability.

Having two independent sensors checking the same point in the process allows you to do an informal accuracy check. If one fails, the other is usually unaffected and if you lose power, the bimetal will still function. And if the steam is bent, the sensor will still function.

In this video, REOTEMP Instrument explains all of the benefits to their Instrument Dual Mode Thermometers.

Partner Videos,

You may also like

using-a-guard-liner-in-a-hose-assembly

When should you use a guard or liner in a hose assembly?

Corrugated assemblies are useful in a variety of critical service and industrial applications, but sometimes an accessory is needed to meet all of the performance requirements.

oliver-twinsafe-valves1

Oliver Valves Twinsafe

During this video, Ian Bryant, Engineering Manager at Oliver Valves, shows off their manufacturing operations and explains the design of a Double Block & Bleed valve.

Understanding Certifications in the Hose and Piping Industry

Understanding Certifications in the Hose and Piping Industry

In this video, Hose Master explains how to determine if a specific requirement or certification is necessary for your application.

Oliver Valves Instrumentation and Pipeline Valves

Oliver Valves Instrumentation and Pipeline Valves

Oliver Valves has since grown to become one of the world’s leading manufacturers of instrumentation, subsea, and pipeline valves for the global energy sector and they’ve manufactured more than 300,000 of these units installed worldwide.

An Introduction to Aflex Hose

An Introduction to Aflex Hose

Aflex Hose is a world-class manufacturer of PTFE flexible hose. Every step in their process from engineering, manufacturing, equipment innovation, service, training and certifications is continuously monitored and improved to deliver the best metal hose and expansion joints.

dos-donts-hose-part-two

Hose Do’s and Don’ts Part 2

In this video, Hose Master explains Hose applications can be tricky, and misapplying or improperly installing a hose can severely limit its ability to perform in service and can reduce its lifespan.

hose-master-dos-donts-1

Hose Do’s and Don’ts Part 1

Hose applications can be tricky, and misapplying or improperly installing a hose can severely limit its ability to perform in service, and can reduce its lifespan. Following these tips can really help!

measuring-metal-hose-assembly-lengths

Measuring Metal Hose Assembly Lengths

In this video, Frank Caprio from Hose Master provides tips on how to accurately measure hose lengths for flexible metal hose assemblies.

oliver-twinsafe

Oliver Twinsafe Valves

Oliver Twinsafe offers a range of valves from 1″ to 16″ in either full or reduced bore sizes, in ASME pressure Classes from 150 to 2500 and API ratings up to 10,000 API. Both soft and metal seated options are available.

diaphragm-seal-repair

Can a Diaphragm Seal be repaired?

Partner Videos,

Along with superior product quality, REOTEMP is proud to offer responsive customer service for Diaphragm seals, intuitive online product configurators, and the industry’s quickest lead times.

Page 2 of 4